Dell OS10

Dell SmartFabric OS10: interfaces, VLANs, VLT, routing and rollback.

Other / vendor neutral Requires SmartCom Revisited 1.0.0 or newer

by Nathan Kirk · 95 downloads · MIT licence · revision 1 · published 14 Aug 2026

This bundle can change or destroy device state

Shuts down an interface (1 step) — Administratively disables an interface. If it is the interface you are connected over, you lose the session.
Reboots or reloads the device (1 step) — Restarts the device. Any session on it drops, and anything not saved is lost.

Show exactly which steps matched

Shut Down Interface — Shuts down an interface (steps[3], sent text)
```
shutdown
```
Reload Switch — Reboots or reloads the device (steps[1], sent text)
```
reload
```

Flagged automatically by matching command text. It is a prompt to read the script, not a verdict — plenty of legitimate buttons reboot things on purpose.

3 sets, 111 buttons, 184 steps · 136.2 KB

File format version 1 · exported by Smartcom Revisited

Download .buttons.json

SHA-256 de7f94d49a118837d431063a7555e14ee435e56603fec464c28e21a3d19d901c

You get the exact file the uploader submitted, byte for byte — that checksum is what sha256sum will print. Import it from the button panel in SmartCom Revisited.

About this set

Dell OS10 switching from the CLI: interface and VLAN configuration, port-channels and VLT peer health, routing and BGP, plus config checkpoints, image management and the guarded reload.

Every button, in full

Exactly what gets sent

This is the complete script of the file below — nothing is summarised or hidden. Read it before you download it, the same way you would read a script someone emailed you.

Dell OS10 - Interfaces & Switching

33 buttons

Ports, VLANs, port-channels, VLT peers and MAC tables.

Interface Status

Run: show interface status

1 step

Send
```
show interface status
```
Sends Enter afterwards.

Interface Brief

Run: show interface brief

1 step

Send
```
show interface brief
```
Sends Enter afterwards.

Interface Detail

Run: show interface {{IFACE}}

1 step · 1 input

Send
```
show interface {{IFACE}}
```
Sends Enter afterwards.

Interface Counters

Run: show interface {{IFACE}} counters

1 step · 1 input

Send
```
show interface {{IFACE}} counters
```
Sends Enter afterwards.

Interface Transceiver

Run: show interface {{IFACE}} transceiver

1 step · 1 input

Send
```
show interface {{IFACE}} transceiver
```
Sends Enter afterwards.

Interface Descriptions

Run: show interface description

1 step

Send
```
show interface description
```
Sends Enter afterwards.

Port-Channel Summary

Run: show port-channel summary

1 step

Send
```
show port-channel summary
```
Sends Enter afterwards.

Port-Channel Detail

Run: show interface port-channel {{LAG}}

1 step · 1 input

Send
```
show interface port-channel {{LAG}}
```
Sends Enter afterwards.

LACP Interfaces

Run: show lacp interface {{IFACE}}

1 step · 1 input

Send
```
show lacp interface {{IFACE}}
```
Sends Enter afterwards.

VLAN Summary

Run: show vlan

1 step

Send
```
show vlan
```
Sends Enter afterwards.

VLAN Detail

Run: show vlan {{VLAN}}

1 step · 1 input

Send
```
show vlan {{VLAN}}
```
Sends Enter afterwards.

MAC Address Table

Run: show mac address-table

1 step

Send
```
show mac address-table
```
Sends Enter afterwards.

Find MAC Address

Run: show mac address-table address {{MAC}}

1 step · 1 input

Send
```
show mac address-table address {{MAC}}
```
Sends Enter afterwards.

MAC Table Count

Run: show mac address-table count

1 step

Send
```
show mac address-table count
```
Sends Enter afterwards.

Spanning-Tree Brief

Run: show spanning-tree brief

1 step

Send
```
show spanning-tree brief
```
Sends Enter afterwards.

Spanning-Tree Detail

Run: show spanning-tree

1 step

Send
```
show spanning-tree
```
Sends Enter afterwards.

VLT Status

Run: show vlt {{VLT_ID}}

1 step · 1 input

Send
```
show vlt {{VLT_ID}}
```
Sends Enter afterwards.

VLT Peer Detail

Run: show vlt {{VLT_ID}} detail

1 step · 1 input

Send
```
show vlt {{VLT_ID}} detail
```
Sends Enter afterwards.

VLT Mismatch Check

Run: show vlt {{VLT_ID}} mismatch

1 step · 1 input

Send
```
show vlt {{VLT_ID}} mismatch
```
Sends Enter afterwards.

VLT Backup Link

Run: show vlt {{VLT_ID}} backup-link

1 step · 1 input

Send
```
show vlt {{VLT_ID}} backup-link
```
Sends Enter afterwards.

LLDP Neighbours

Run: show lldp neighbors

1 step

Send
```
show lldp neighbors
```
Sends Enter afterwards.

LLDP Neighbour Detail

Run: show lldp neighbors interface {{IFACE}} detail

1 step · 1 input

Send

show lldp neighbors interface {{IFACE}} detail

Sends Enter afterwards.

Unicast Storm Control

Run: show storm-control

1 step

Send
```
show storm-control
```
Sends Enter afterwards.

Set Interface Description

Run: configure terminal ; interface {{IFACE}} ; description {{DESCRIPTION}} ; exit ; exit

5 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
description {{DESCRIPTION}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Set Access VLAN

Run: configure terminal ; interface {{IFACE}} ; switchport mode access ; switchport access vlan {{VLAN}} ; exit ; exit

6 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
switchport mode access
```
Sends Enter afterwards.
Send
```
switchport access vlan {{VLAN}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Configure Trunk Port

Run: configure terminal ; interface {{IFACE}} ; switchport mode trunk ; switchport trunk allowed vlan {{VLAN_LIST}} ; exit ; exit

6 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
switchport mode trunk
```
Sends Enter afterwards.

Send

switchport trunk allowed vlan {{VLAN_LIST}}

Sends Enter afterwards.

Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Create VLAN

Run: configure terminal ; interface vlan {{VLAN}} ; description {{DESCRIPTION}} ; no shutdown ; exit ; exit

6 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface vlan {{VLAN}}
```
Sends Enter afterwards.
Send
```
description {{DESCRIPTION}}
```
Sends Enter afterwards.
Send
```
no shutdown
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Enable Interface

Run: configure terminal ; interface {{IFACE}} ; no shutdown ; exit ; exit

5 steps · asks for confirmation before it runs · 1 input

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
no shutdown
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Add Port to Port-Channel

Run: configure terminal ; interface {{IFACE}} ; channel-group {{LAG}} mode active ; exit ; exit

5 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
channel-group {{LAG}} mode active
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Shut Down Interface

Run: configure terminal ; interface {{IFACE}} ; shutdown ; exit ; exit

6 steps · asks for confirmation before it runs · 1 input

Shuts down an interface

Confirm

Asks yes or no: “Shut down {{IFACE}}. Anything behind it loses its link immediately, and if it is a VLT or uplink member the fabric reconverges. Continue?”

Answering no stops the script here.
Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
shutdown
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Clear Interface Counters

Run: clear counters interface {{IFACE}}

2 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Reset the counters on {{IFACE}}. The error history you are looking at is lost. Continue?”

Answering no stops the script here.
Send
```
clear counters interface {{IFACE}}
```
Sends Enter afterwards.

Delete VLAN

Run: configure terminal ; no interface vlan {{VLAN}} ; exit

4 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Delete VLAN {{VLAN}} and its SVI. Ports and hosts in it lose their network. Continue?”

Answering no stops the script here.
Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
no interface vlan {{VLAN}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Remove Port from Port-Channel

Run: configure terminal ; interface {{IFACE}} ; no channel-group ; exit ; exit

6 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Take {{IFACE}} out of its port-channel. The bundle loses bandwidth and, if this was the last member, goes down entirely. Continue?”

Answering no stops the script here.
Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface {{IFACE}}
```
Sends Enter afterwards.
Send
```
no channel-group
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Dell OS10 - Routing & Reachability

35 buttons

Routing table, OSPF, BGP, VRRP, ARP and path testing.

Routing Table

Run: show ip route

1 step

Send
```
show ip route
```
Sends Enter afterwards.

Route for Prefix

Run: show ip route {{PREFIX}}

1 step · 1 input

Send
```
show ip route {{PREFIX}}
```
Sends Enter afterwards.

Route Summary

Run: show ip route summary

1 step

Send
```
show ip route summary
```
Sends Enter afterwards.

Connected Routes

Run: show ip route connected

1 step

Send
```
show ip route connected
```
Sends Enter afterwards.

Static Routes

Run: show ip route static

1 step

Send
```
show ip route static
```
Sends Enter afterwards.

BGP Routes

Run: show ip route bgp

1 step

Send
```
show ip route bgp
```
Sends Enter afterwards.

Routes in VRF

Run: show ip route vrf {{VRF}}

1 step · 1 input

Send
```
show ip route vrf {{VRF}}
```
Sends Enter afterwards.

ARP Table

Run: show ip arp

1 step

Send
```
show ip arp
```
Sends Enter afterwards.

ARP for Host

Run: show ip arp | grep {{IP}}

1 step · 1 input

Send
```
show ip arp | grep {{IP}}
```
Sends Enter afterwards.

IP Interface Brief

Run: show ip interface brief

1 step

Send
```
show ip interface brief
```
Sends Enter afterwards.

SVI Detail

Run: show ip interface vlan {{VLAN}}

1 step · 1 input

Send
```
show ip interface vlan {{VLAN}}
```
Sends Enter afterwards.

OSPF Neighbours

Run: show ip ospf neighbor

1 step

Send
```
show ip ospf neighbor
```
Sends Enter afterwards.

OSPF Interfaces

Run: show ip ospf interface

1 step

Send
```
show ip ospf interface
```
Sends Enter afterwards.

OSPF Database

Run: show ip ospf database

1 step

Send
```
show ip ospf database
```
Sends Enter afterwards.

BGP Summary

Run: show ip bgp summary

1 step

Send
```
show ip bgp summary
```
Sends Enter afterwards.

BGP Neighbours

Run: show ip bgp neighbors

1 step

Send
```
show ip bgp neighbors
```
Sends Enter afterwards.

BGP Neighbour Detail

Run: show ip bgp neighbors {{PEER}}

1 step · 1 input

Send
```
show ip bgp neighbors {{PEER}}
```
Sends Enter afterwards.

BGP Routes Received

Run: show ip bgp neighbors {{PEER}} received-routes

1 step · 1 input

Send

show ip bgp neighbors {{PEER}} received-routes

Sends Enter afterwards.

BGP Advertised Routes

Run: show ip bgp neighbors {{PEER}} advertised-routes

1 step · 1 input

Send

show ip bgp neighbors {{PEER}} advertised-routes

Sends Enter afterwards.

VRRP Brief

Run: show vrrp brief

1 step

Send
```
show vrrp brief
```
Sends Enter afterwards.

VRRP Detail

Run: show vrrp

1 step

Send
```
show vrrp
```
Sends Enter afterwards.

VRF List

Run: show ip vrf

1 step

Send
```
show ip vrf
```
Sends Enter afterwards.

DHCP Relay Config

Run: show running-configuration | grep helper-address

1 step

Send

show running-configuration | grep helper-address

Sends Enter afterwards.

Ping Host

Run: ping {{HOST}} count {{COUNT}}

1 step · 2 inputs

Send
```
ping {{HOST}} count {{COUNT}}
```
Sends Enter afterwards.

Ping in VRF

Run: ping vrf {{VRF}} {{HOST}} count {{COUNT}}

1 step · 3 inputs

Send

ping vrf {{VRF}} {{HOST}} count {{COUNT}}

Sends Enter afterwards.

Ping from Source

Run: ping {{HOST}} source {{IP}} count {{COUNT}}

1 step · 3 inputs

Send

ping {{HOST}} source {{IP}} count {{COUNT}}

Sends Enter afterwards.

Traceroute

Run: traceroute {{HOST}}

1 step · 1 input

Send
```
traceroute {{HOST}}
```
Sends Enter afterwards.

Traceroute in VRF

Run: traceroute vrf {{VRF}} {{HOST}}

1 step · 2 inputs

Send
```
traceroute vrf {{VRF}} {{HOST}}
```
Sends Enter afterwards.

Add Static Route

Run: configure terminal ; ip route {{PREFIX}} {{NEXT_HOP}} ; exit

3 steps · asks for confirmation before it runs · 2 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
ip route {{PREFIX}} {{NEXT_HOP}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Add SVI Address

Run: configure terminal ; interface vlan {{VLAN}} ; ip address {{IP}}/{{PREFIX_LEN}} ; no shutdown ; exit ; exit

6 steps · asks for confirmation before it runs · 3 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
interface vlan {{VLAN}}
```
Sends Enter afterwards.
Send
```
ip address {{IP}}/{{PREFIX_LEN}}
```
Sends Enter afterwards.
Send
```
no shutdown
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Add BGP Neighbour

Run: configure terminal ; router bgp {{ASN}} ; neighbor {{PEER}} ; remote-as {{PEER_AS}} ; no shutdown ; exit ; exit ; exit

8 steps · asks for confirmation before it runs · 3 inputs

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
router bgp {{ASN}}
```
Sends Enter afterwards.
Send
```
neighbor {{PEER}}
```
Sends Enter afterwards.
Send
```
remote-as {{PEER_AS}}
```
Sends Enter afterwards.
Send
```
no shutdown
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Remove Static Route

Run: configure terminal ; no ip route {{PREFIX}} {{NEXT_HOP}} ; exit

4 steps · asks for confirmation before it runs · 2 inputs

Confirm

Asks yes or no: “Remove the route to {{PREFIX}}. Traffic for it follows whatever is left, or nothing. Continue?”

Answering no stops the script here.
Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
no ip route {{PREFIX}} {{NEXT_HOP}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Clear ARP Cache

Run: clear ip arp

2 steps · asks for confirmation before it runs

Confirm

Asks yes or no: “Flush the ARP cache. Expect a brief pause on active flows while it repopulates. Continue?”

Answering no stops the script here.
Send
```
clear ip arp
```
Sends Enter afterwards.

Clear BGP Neighbour

Run: clear ip bgp {{PEER}}

2 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Reset the BGP session with {{PEER}}. Prefixes from that peer are withdrawn until it rebuilds. Continue?”

Answering no stops the script here.
Send
```
clear ip bgp {{PEER}}
```
Sends Enter afterwards.

Soft-Clear BGP Neighbour

Run: clear ip bgp {{PEER}} soft in

2 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Re-request routes from {{PEER}} without dropping the session. Prefixes may churn while it settles. Continue?”

Answering no stops the script here.
Send
```
clear ip bgp {{PEER}} soft in
```
Sends Enter afterwards.

Dell OS10 - System, Config & Images

43 buttons

Health, logs, config checkpoints, image install and reload.

Version

Run: show version

1 step

Send
```
show version
```
Sends Enter afterwards.

System Summary

Run: show system

1 step

Send
```
show system
```
Sends Enter afterwards.

System Brief

Run: show system brief

1 step

Send
```
show system brief
```
Sends Enter afterwards.

Environment

Run: show environment

1 step

Send
```
show environment
```
Sends Enter afterwards.

Power Supplies

Run: show system | grep -A 10 "Power Supply"

1 step

Send
```
show system | grep -A 10 "Power Supply"
```
Sends Enter afterwards.

Fan Status

Run: show system | grep -A 10 Fan

1 step

Send
```
show system | grep -A 10 Fan
```
Sends Enter afterwards.

Inventory

Run: show inventory

1 step

Send
```
show inventory
```
Sends Enter afterwards.

CPU Usage

Run: show processes node-id 1 | head -20

1 step

Send
```
show processes node-id 1 | head -20
```
Sends Enter afterwards.

Memory Usage

Run: show processes memory

1 step

Send
```
show processes memory
```
Sends Enter afterwards.

Filesystem Usage

Run: show boot detail

1 step

Send
```
show boot detail
```
Sends Enter afterwards.

Running Config

Run: show running-configuration

1 step

Send
```
show running-configuration
```
Sends Enter afterwards.

Running Config Section

Run: show running-configuration interface {{IFACE}}

1 step · 1 input

Send

show running-configuration interface {{IFACE}}

Sends Enter afterwards.

Startup Config

Run: show startup-configuration

1 step

Send
```
show startup-configuration
```
Sends Enter afterwards.

Config Differences

Run: show diff running-configuration startup-configuration

1 step

Send

show diff running-configuration startup-configuration

Sends Enter afterwards.

Checkpoint List

Run: dir config

1 step

Send
```
dir config
```
Sends Enter afterwards.

Boot Images

Run: show boot

1 step

Send
```
show boot
```
Sends Enter afterwards.

Image Version Detail

Run: show version detail

1 step

Send
```
show version detail
```
Sends Enter afterwards.

Event Log

Run: show logging log-file | tail -{{LINES}}

1 step · 1 input

Send
```
show logging log-file | tail -{{LINES}}
```
Sends Enter afterwards.

Search Log

Run: show logging log-file | grep {{PATTERN}} | tail -{{LINES}}

1 step · 2 inputs

Send

show logging log-file | grep {{PATTERN}} | tail -{{LINES}}

Sends Enter afterwards.

Alarm Log

Run: show alarms

1 step

Send
```
show alarms
```
Sends Enter afterwards.

Users

Run: show running-configuration users

1 step

Send
```
show running-configuration users
```
Sends Enter afterwards.

Active Sessions

Run: show users

1 step

Send
```
show users
```
Sends Enter afterwards.

Management Interface

Run: show interface mgmt 1/1/1

1 step

Send
```
show interface mgmt 1/1/1
```
Sends Enter afterwards.

NTP Status

Run: show ntp status

1 step

Send
```
show ntp status
```
Sends Enter afterwards.

NTP Associations

Run: show ntp associations

1 step

Send
```
show ntp associations
```
Sends Enter afterwards.

Clock

Run: show clock

1 step

Send
```
show clock
```
Sends Enter afterwards.

SNMP Config

Run: show running-configuration snmp

1 step

Send
```
show running-configuration snmp
```
Sends Enter afterwards.

AAA Config

Run: show running-configuration aaa

1 step

Send
```
show running-configuration aaa
```
Sends Enter afterwards.

Support Bundle Files

Run: dir supportbundle

1 step

Send
```
dir supportbundle
```
Sends Enter afterwards.

Save Running Config

Run: copy running-configuration startup-configuration

1 step · asks for confirmation before it runs

Send

copy running-configuration startup-configuration

Sends Enter afterwards.

Set Hostname

Run: configure terminal ; hostname {{HOSTNAME}} ; exit

3 steps · asks for confirmation before it runs · 1 input

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
hostname {{HOSTNAME}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Add NTP Server

Run: configure terminal ; ntp server {{NTP}} ; exit

3 steps · asks for confirmation before it runs · 1 input

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
ntp server {{NTP}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Set Logging Host

Run: configure terminal ; logging server {{SERVER}} ; exit

3 steps · asks for confirmation before it runs · 1 input

Send
```
configure terminal
```
Sends Enter afterwards.
Send
```
logging server {{SERVER}}
```
Sends Enter afterwards.
Send
```
exit
```
Sends Enter afterwards.

Save Config Checkpoint

Named copy of the running config on the switch. Take one before any change worth undoing.

1 step · asks for confirmation before it runs · 1 input

Send

copy running-configuration config://{{FILE}}

Sends Enter afterwards.

Back Up Config to TFTP

Run: copy running-configuration tftp://{{SERVER}}/{{FILE}}

1 step · asks for confirmation before it runs · 2 inputs

Send

copy running-configuration tftp://{{SERVER}}/{{FILE}}

Sends Enter afterwards.

Generate Support Bundle

Collects diagnostics for a support case. It takes a while and writes a sizeable file.

1 step · asks for confirmation before it runs

Send
```
system support-bundle
```
Sends Enter afterwards.

Download Image

Run: image download {{URL}}

1 step · asks for confirmation before it runs · 1 input

Send
```
image download {{URL}}
```
Sends Enter afterwards.

Restore Config from Checkpoint

Run: copy config://{{FILE}} running-configuration

2 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Merge {{FILE}} into the running config. Overlapping settings are replaced, which can include your management access. Continue?”

Answering no stops the script here.

Send

copy config://{{FILE}} running-configuration

Sends Enter afterwards.

Restore Config from TFTP

Run: copy tftp://{{SERVER}}/{{FILE}} running-configuration

2 steps · asks for confirmation before it runs · 2 inputs

Confirm

Asks yes or no: “Merge the config from {{SERVER}} into the running config. Overlapping settings are replaced immediately. Continue?”

Answering no stops the script here.

Send

copy tftp://{{SERVER}}/{{FILE}} running-configuration

Sends Enter afterwards.

Install Downloaded Image

Run: image install image://{{IMAGE}}

2 steps · asks for confirmation before it runs · 1 input

Confirm

Asks yes or no: “Install {{IMAGE}} into the standby partition. It only takes effect after a reload with the boot partition changed — but the install itself is heavy and should not be interrupted. Continue?”

Answering no stops the script here.
Send
```
image install image://{{IMAGE}}
```
Sends Enter afterwards.

Set Next Boot Partition

Run: boot system standby

2 steps · asks for confirmation before it runs

Confirm

Asks yes or no: “Boot from the standby partition next time. If the image there is wrong or incomplete, the switch may not come back without console access. Continue?”

Answering no stops the script here.
Send
```
boot system standby
```
Sends Enter afterwards.

Reload Switch

Run: reload

2 steps · asks for confirmation before it runs

Reboots or reloads the device

Confirm

Asks yes or no: “Reload this switch. Everything through it stops for the length of the boot, and unsaved config is lost. Continue?”

Answering no stops the script here.
Send
```
reload
```
Sends Enter afterwards.

Delete Startup Config

Run: delete startup-configuration

2 steps · asks for confirmation before it runs

Confirm

Asks yes or no: “Delete the startup config. On the next reload this switch comes up unconfigured with no management access. Continue?”

Answering no stops the script here.
Send
```
delete startup-configuration
```
Sends Enter afterwards.

Version history

Revision 1 current

First published version.

14 Aug 2026 · 136.2 KB · needs 1.0.0+ · de7f94d49a118837…

View Download