Linux - Networking & Remote Access

Linux Network & System Commands

Linux Requires SmartCom Revisited 1.0.0 or newer

by Nathan Kirk · 48 downloads · MIT licence · revision 1 · published 13 Aug 2026

This bundle can change or destroy device state

Reboots or reloads the device (5 steps) — Restarts the device. Any session on it drops, and anything not saved is lost.
Shuts down an interface (1 step) — Administratively disables an interface. If it is the interface you are connected over, you lose the session.

Show exactly which steps matched

Reboot System — Reboots or reloads the device (steps[0], sent text)
```
sudo systemctl reboot
```
Power Off System — Reboots or reloads the device (steps[0], sent text)
```
sudo systemctl poweroff
```
Schedule Reboot — Reboots or reloads the device (steps[0], sent text)
```
sudo shutdown -r +{{MINUTES}}
```
Schedule Shutdown — Reboots or reloads the device (steps[0], sent text)
```
sudo shutdown -h +{{MINUTES}}
```
Show Reboot History — Reboots or reloads the device (steps[0], sent text)
```
last reboot
```
Show Shutdown History — Shuts down an interface (steps[0], sent text)
```
last -x shutdown
```

Flagged automatically by matching command text. It is a prompt to read the script, not a verdict — plenty of legitimate buttons reboot things on purpose.

3 sets, 92 buttons, 92 steps · 82.9 KB

File format version 1 · exported by Smartcom Revisited

Download .buttons.json

SHA-256 ff248ed1afe8c980e3da26a0a8697082fe6ed6869ef59f9367b38c576d047522

You get the exact file the uploader submitted, byte for byte — that checksum is what sha256sum will print. Import it from the button panel in SmartCom Revisited.

About this set

Linux commands for networking, remote access, packet capture, firewalls, system and hardware information, diagnostics, security checks, troubleshooting, reboots, and shutdowns.

Every button, in full

Exactly what gets sent

This is the complete script of the file below — nothing is summarised or hidden. Read it before you download it, the same way you would read a script someone emailed you.

Linux - Networking & Remote Access

40 buttons

Show IP Addresses

Run: ip -br address

1 step

Send
```
ip -br address
```
Sends Enter afterwards.

Show Interfaces

Run: ip link show

1 step

Send
```
ip link show
```
Sends Enter afterwards.

Show Routing Table

Run: ip route

1 step

Send
```
ip route
```
Sends Enter afterwards.

Show Default Route

Run: ip route show default

1 step

Send
```
ip route show default
```
Sends Enter afterwards.

Show ARP Neighbors

Run: ip neigh show

1 step

Send
```
ip neigh show
```
Sends Enter afterwards.

Bring Interface Up

Run: sudo ip link set {{INTERFACE}} up

1 step · 1 input

Send
```
sudo ip link set {{INTERFACE}} up
```
Sends Enter afterwards.

Bring Interface Down

Run: sudo ip link set {{INTERFACE}} down

1 step · asks for confirmation before it runs · 1 input

Send
```
sudo ip link set {{INTERFACE}} down
```
Sends Enter afterwards.

Add IP Address

Run: sudo ip address add {{IP_CIDR}} dev {{INTERFACE}}

1 step · 2 inputs

Send

sudo ip address add {{IP_CIDR}} dev {{INTERFACE}}

Sends Enter afterwards.

Remove IP Address

Run: sudo ip address del {{IP_CIDR}} dev {{INTERFACE}}

1 step · asks for confirmation before it runs · 2 inputs

Send

sudo ip address del {{IP_CIDR}} dev {{INTERFACE}}

Sends Enter afterwards.

Ping Host

Run: ping -c {{COUNT}} {{HOST}}

1 step · 2 inputs

Send
```
ping -c {{COUNT}} {{HOST}}
```
Sends Enter afterwards.

Trace Route

Run: traceroute {{HOST}}

1 step · 1 input

Send
```
traceroute {{HOST}}
```
Sends Enter afterwards.

Trace Route with IP

Run: tracepath {{HOST}}

1 step · 1 input

Send
```
tracepath {{HOST}}
```
Sends Enter afterwards.

DNS Lookup

Run: dig {{HOST}}

1 step · 1 input

Send
```
dig {{HOST}}
```
Sends Enter afterwards.

DNS Lookup Specific Server

Run: dig @{{DNS_SERVER}} {{HOST}} {{RECORD_TYPE}}

1 step · 3 inputs

Send

dig @{{DNS_SERVER}} {{HOST}} {{RECORD_TYPE}}

Sends Enter afterwards.

Reverse DNS Lookup

Run: dig -x {{IP_ADDRESS}}

1 step · 1 input

Send
```
dig -x {{IP_ADDRESS}}
```
Sends Enter afterwards.

Show Host Resolution

Run: getent hosts {{HOST}}

1 step · 1 input

Send
```
getent hosts {{HOST}}
```
Sends Enter afterwards.

Show Listening Ports

Run: ss -lntup

1 step

Send
```
ss -lntup
```
Sends Enter afterwards.

Show TCP Connections

Run: ss -tnp

1 step

Send
```
ss -tnp
```
Sends Enter afterwards.

Show Port Process

Run: sudo lsof -i :{{PORT}}

1 step · 1 input

Send
```
sudo lsof -i :{{PORT}}
```
Sends Enter afterwards.

Test TCP Port

Run: nc -vz {{HOST}} {{PORT}}

1 step · 2 inputs

Send
```
nc -vz {{HOST}} {{PORT}}
```
Sends Enter afterwards.

Listen on TCP Port

Run: nc -lvnp {{PORT}}

1 step · 1 input

Send
```
nc -lvnp {{PORT}}
```
Sends Enter afterwards.

HTTP Headers

Run: curl -I {{URL}}

1 step · 1 input

Send
```
curl -I {{URL}}
```
Sends Enter afterwards.

HTTP Request Verbose

Run: curl -v {{URL}}

1 step · 1 input

Send
```
curl -v {{URL}}
```
Sends Enter afterwards.

Download File

Run: curl -fLO {{URL}}

1 step · 1 input

Send
```
curl -fLO {{URL}}
```
Sends Enter afterwards.

Download to Filename

Run: curl -fL {{URL}} -o {{FILE}}

1 step · 2 inputs

Send
```
curl -fL {{URL}} -o {{FILE}}
```
Sends Enter afterwards.

Show Public IP

Run: curl -4 ifconfig.me

1 step

Send
```
curl -4 ifconfig.me
```
Sends Enter afterwards.

SSH to Host

Run: ssh {{USERNAME}}@{{HOST}}

1 step · 2 inputs

Send
```
ssh {{USERNAME}}@{{HOST}}
```
Sends Enter afterwards.

SSH on Port

Run: ssh -p {{PORT}} {{USERNAME}}@{{HOST}}

1 step · 3 inputs

Send
```
ssh -p {{PORT}} {{USERNAME}}@{{HOST}}
```
Sends Enter afterwards.

Run Remote Command

Run: ssh {{USERNAME}}@{{HOST}} "{{COMMAND}}"

1 step · 3 inputs

Send
```
ssh {{USERNAME}}@{{HOST}} "{{COMMAND}}"
```
Sends Enter afterwards.

Copy File to Remote

Run: scp {{SOURCE}} {{USERNAME}}@{{HOST}}:{{DESTINATION}}

1 step · 4 inputs

Send

scp {{SOURCE}} {{USERNAME}}@{{HOST}}:{{DESTINATION}}

Sends Enter afterwards.

Copy File from Remote

Run: scp {{USERNAME}}@{{HOST}}:{{SOURCE}} {{DESTINATION}}

1 step · 4 inputs

Send

scp {{USERNAME}}@{{HOST}}:{{SOURCE}} {{DESTINATION}}

Sends Enter afterwards.

Rsync to Remote

Run: rsync -avh --progress {{SOURCE}} {{USERNAME}}@{{HOST}}:{{DESTINATION}}

1 step · 4 inputs

Send

rsync -avh --progress {{SOURCE}} {{USERNAME}}@{{HOST}}:{{DESTINATION}}

Sends Enter afterwards.

Show NetworkManager Connections

Run: nmcli connection show

1 step

Send
```
nmcli connection show
```
Sends Enter afterwards.

Restart NetworkManager

Run: sudo systemctl restart NetworkManager

1 step

Send
```
sudo systemctl restart NetworkManager
```
Sends Enter afterwards.

Capture Packets

Run: sudo tcpdump -ni {{INTERFACE}}

1 step · 1 input

Send
```
sudo tcpdump -ni {{INTERFACE}}
```
Sends Enter afterwards.

Capture Port Traffic

Run: sudo tcpdump -ni {{INTERFACE}} port {{PORT}}

1 step · 2 inputs

Send

sudo tcpdump -ni {{INTERFACE}} port {{PORT}}

Sends Enter afterwards.

Save Packet Capture

Run: sudo tcpdump -ni {{INTERFACE}} -w {{CAPTURE_FILE}}

1 step · 2 inputs

Send

sudo tcpdump -ni {{INTERFACE}} -w {{CAPTURE_FILE}}

Sends Enter afterwards.

Show Firewall Rules nftables

Run: sudo nft list ruleset

1 step

Send
```
sudo nft list ruleset
```
Sends Enter afterwards.

Show UFW Status

Run: sudo ufw status verbose

1 step

Send
```
sudo ufw status verbose
```
Sends Enter afterwards.

Show Firewalld Rules

Run: sudo firewall-cmd --list-all

1 step

Send
```
sudo firewall-cmd --list-all
```
Sends Enter afterwards.

Linux - System Information & Hardware

28 buttons

Hostname

Run: hostname

1 step

Send
```
hostname
```
Sends Enter afterwards.

Fully Qualified Hostname

Run: hostname -f

1 step

Send
```
hostname -f
```
Sends Enter afterwards.

Set Hostname

Run: sudo hostnamectl set-hostname {{HOSTNAME}}

1 step · 1 input

Send

sudo hostnamectl set-hostname {{HOSTNAME}}

Sends Enter afterwards.

Operating System Info

Run: cat /etc/os-release

1 step

Send
```
cat /etc/os-release
```
Sends Enter afterwards.

Kernel Version

Run: uname -r

1 step

Send
```
uname -r
```
Sends Enter afterwards.

Full Kernel Info

Run: uname -a

1 step

Send
```
uname -a
```
Sends Enter afterwards.

System Overview

Run: hostnamectl

1 step

Send
```
hostnamectl
```
Sends Enter afterwards.

CPU Information

Run: lscpu

1 step

Send
```
lscpu
```
Sends Enter afterwards.

Hardware Summary

Run: sudo lshw -short

1 step

Send
```
sudo lshw -short
```
Sends Enter afterwards.

PCI Devices

Run: lspci -nn

1 step

Send
```
lspci -nn
```
Sends Enter afterwards.

USB Devices

Run: lsusb

1 step

Send
```
lsusb
```
Sends Enter afterwards.

Memory Modules

Run: sudo dmidecode -t memory

1 step

Send
```
sudo dmidecode -t memory
```
Sends Enter afterwards.

System Manufacturer

Run: sudo dmidecode -t system

1 step

Send
```
sudo dmidecode -t system
```
Sends Enter afterwards.

BIOS Information

Run: sudo dmidecode -t bios

1 step

Send
```
sudo dmidecode -t bios
```
Sends Enter afterwards.

Uptime

Run: uptime

1 step

Send
```
uptime
```
Sends Enter afterwards.

Boot Time

Run: uptime -s

1 step

Send
```
uptime -s
```
Sends Enter afterwards.

Current Date

Run: date

1 step

Send
```
date
```
Sends Enter afterwards.

Current Timezone

Run: timedatectl

1 step

Send
```
timedatectl
```
Sends Enter afterwards.

Set Timezone

Run: sudo timedatectl set-timezone {{TIMEZONE}}

1 step · 1 input

Send

sudo timedatectl set-timezone {{TIMEZONE}}

Sends Enter afterwards.

Show NTP Status

Run: timedatectl timesync-status

1 step

Send
```
timedatectl timesync-status
```
Sends Enter afterwards.

Show Environment

Run: env | sort

1 step

Send
```
env | sort
```
Sends Enter afterwards.

Show Shell

Run: echo $SHELL

1 step

Send
```
echo $SHELL
```
Sends Enter afterwards.

Show PATH

Run: echo $PATH | tr ":" " "

1 step

Send
```
echo $PATH | tr ":" "
"
```
Sends Enter afterwards.

Command Location

Run: command -v {{COMMAND_NAME}}

1 step · 1 input

Send
```
command -v {{COMMAND_NAME}}
```
Sends Enter afterwards.

Command Type

Run: type {{COMMAND_NAME}}

1 step · 1 input

Send
```
type {{COMMAND_NAME}}
```
Sends Enter afterwards.

Show Limits

Run: ulimit -a

1 step

Send
```
ulimit -a
```
Sends Enter afterwards.

Show Loaded Kernel Modules

Run: lsmod

1 step

Send
```
lsmod
```
Sends Enter afterwards.

Show Kernel Command Line

Run: cat /proc/cmdline

1 step

Send
```
cat /proc/cmdline
```
Sends Enter afterwards.

Linux - Diagnostics, Security & Power

24 buttons

Recent Kernel Messages

Run: sudo dmesg -T | tail -n {{LINES}}

1 step · 1 input

Send
```
sudo dmesg -T | tail -n {{LINES}}
```
Sends Enter afterwards.

Follow Kernel Messages

Run: sudo dmesg -wT

1 step

Send
```
sudo dmesg -wT
```
Sends Enter afterwards.

Show Errors This Boot

Run: sudo journalctl -b -p err

1 step

Send
```
sudo journalctl -b -p err
```
Sends Enter afterwards.

Show Failed Units

Run: systemctl --failed

1 step

Send
```
systemctl --failed
```
Sends Enter afterwards.

Show SELinux Status

Run: sestatus

1 step

Send
```
sestatus
```
Sends Enter afterwards.

Show AppArmor Status

Run: sudo aa-status

1 step

Send
```
sudo aa-status
```
Sends Enter afterwards.

Show Audit Events

Run: sudo ausearch -ts recent

1 step

Send
```
sudo ausearch -ts recent
```
Sends Enter afterwards.

Check File Descriptor Limit

Run: cat /proc/sys/fs/file-max

1 step

Send
```
cat /proc/sys/fs/file-max
```
Sends Enter afterwards.

Show Process Limits

Run: cat /proc/{{PID}}/limits

1 step · 1 input

Send
```
cat /proc/{{PID}}/limits
```
Sends Enter afterwards.

Show System Calls for Command

Run: strace -f {{COMMAND}}

1 step · 1 input

Send
```
strace -f {{COMMAND}}
```
Sends Enter afterwards.

Test Configuration Command

Run: {{COMMAND}} --test

1 step · 1 input

Send
```
{{COMMAND}} --test
```
Sends Enter afterwards.

Check Bash Syntax

Run: bash -n {{SCRIPT}}

1 step · 1 input

Send
```
bash -n {{SCRIPT}}
```
Sends Enter afterwards.

Show Bash Command History

Run: history

1 step

Send
```
history
```
Sends Enter afterwards.

Clear Page Cache

Run: sudo sh -c "sync; echo 1 > /proc/sys/vm/drop_caches"

1 step · asks for confirmation before it runs

Send

sudo sh -c "sync; echo 1 > /proc/sys/vm/drop_caches"

Sends Enter afterwards.

Reboot System

Run: sudo systemctl reboot

1 step · asks for confirmation before it runs

Reboots or reloads the device

Send
```
sudo systemctl reboot
```
Sends Enter afterwards.

Power Off System

Run: sudo systemctl poweroff

1 step · asks for confirmation before it runs

Reboots or reloads the device

Send
```
sudo systemctl poweroff
```
Sends Enter afterwards.

Schedule Reboot

Run: sudo shutdown -r +{{MINUTES}}

1 step · asks for confirmation before it runs · 1 input

Reboots or reloads the device

Send
```
sudo shutdown -r +{{MINUTES}}
```
Sends Enter afterwards.

Schedule Shutdown

Run: sudo shutdown -h +{{MINUTES}}

1 step · asks for confirmation before it runs · 1 input

Reboots or reloads the device

Send
```
sudo shutdown -h +{{MINUTES}}
```
Sends Enter afterwards.

Cancel Scheduled Shutdown

Run: sudo shutdown -c

1 step

Send
```
sudo shutdown -c
```
Sends Enter afterwards.

Show Reboot History

Run: last reboot

1 step

Reboots or reloads the device

Send
```
last reboot
```
Sends Enter afterwards.

Show Shutdown History

Run: last -x shutdown

1 step

Shuts down an interface

Send
```
last -x shutdown
```
Sends Enter afterwards.

Check Certificate Dates

Run: openssl s_client -connect {{HOST}}:{{PORT}} -servername {{HOST}} </dev/null 2>/dev/null | openssl x509 -noout -dates -subject -issuer

1 step · 2 inputs

Send

openssl s_client -connect {{HOST}}:{{PORT}} -servername {{HOST}} </dev/null 2>/dev/null | openssl x509 -noout -dates -subject -issuer

Sends Enter afterwards.

Generate Random Password

Run: openssl rand -base64 {{LENGTH}}

1 step · 1 input

Send
```
openssl rand -base64 {{LENGTH}}
```
Sends Enter afterwards.

Check Port with Bash

Run: timeout {{SECONDS}} bash -c "</dev/tcp/{{HOST}}/{{PORT}}" && echo open || echo closed

1 step · 3 inputs

Send

timeout {{SECONDS}} bash -c "</dev/tcp/{{HOST}}/{{PORT}}" && echo open || echo closed

Sends Enter afterwards.

Version history

Revision 1 current

First published version.

13 Aug 2026 · 82.9 KB · needs 1.0.0+ · ff248ed1afe8c980…

View Download