Skip to content

MikroTik Operations & Management

MikroTik Operations & Management

MikroTik Requires SmartCom Revisited 1.0.0 or newer

by Nathan Kirk · 80 downloads · MIT licence · revision 1 · published 13 Aug 2026

Download

5 sets, 102 buttons, 102 steps · 107.1 KB

File format version 1 · exported by Smartcom Revisited

Download .buttons.json
SHA-256 88dba494bf313d6f7fe5880c5708be627e426ba66a1e9a67e0162b0bfdb3bfe1

You get the exact file the uploader submitted, byte for byte — that checksum is what sha256sum will print. Import it from the button panel in SmartCom Revisited.

About this set

RouterOS commands for managing VPNs, tunnels, queues, traffic monitoring, troubleshooting, packet captures, users, scripts, scheduled jobs, backups, exports, and system updates.

Every button, in full

Exactly what gets sent

This is the complete script of the file below — nothing is summarised or hidden. Read it before you download it, the same way you would read a script someone emailed you.

MikroTik - VPN & Tunnels

22 buttons

List WireGuard Interfaces

Run: /interface wireguard print detail

1 step

  1. Send 
    /interface wireguard print detail

    Sends Enter afterwards.

Create WireGuard Interface

Run: /interface wireguard add name="{{WG_INTERFACE}}" listen-port={{PORT}} mtu={{MTU}}

1 step · 3 inputs

  1. Send 
    /interface wireguard add name="{{WG_INTERFACE}}" listen-port={{PORT}} mtu={{MTU}}

    Sends Enter afterwards.

List WireGuard Peers

Run: /interface wireguard peers print detail

1 step

  1. Send 
    /interface wireguard peers print detail

    Sends Enter afterwards.

Add WireGuard Peer

Run: /interface wireguard peers add interface="{{WG_INTERFACE}}" public-key="{{PUBLIC_KEY}}" allowed-address={{ALLOWED_ADDRESS}} endpoint-address={{ENDPOINT_HOST}} endpoint-port={{ENDPOINT_PORT}} persistent-keepalive={{KEEPALIVE}}

1 step · 6 inputs

  1. Send 
    /interface wireguard peers add interface="{{WG_INTERFACE}}" public-key="{{PUBLIC_KEY}}" allowed-address={{ALLOWED_ADDRESS}} endpoint-address={{ENDPOINT_HOST}} endpoint-port={{ENDPOINT_PORT}} persistent-keepalive={{KEEPALIVE}}

    Sends Enter afterwards.

Disable WireGuard Peer

Run: /interface wireguard peers disable [find where comment="{{COMMENT}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /interface wireguard peers disable [find where comment="{{COMMENT}}"]

    Sends Enter afterwards.

Enable WireGuard Peer

Run: /interface wireguard peers enable [find where comment="{{COMMENT}}"]

1 step · 1 input

  1. Send 
    /interface wireguard peers enable [find where comment="{{COMMENT}}"]

    Sends Enter afterwards.

Remove WireGuard Peer

Run: /interface wireguard peers remove [find where comment="{{COMMENT}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /interface wireguard peers remove [find where comment="{{COMMENT}}"]

    Sends Enter afterwards.

List IPsec Peers

Run: /ip ipsec peer print detail

1 step

  1. Send 
    /ip ipsec peer print detail

    Sends Enter afterwards.

List IPsec Active Peers

Run: /ip ipsec active-peers print detail

1 step

  1. Send 
    /ip ipsec active-peers print detail

    Sends Enter afterwards.

List IPsec Installed SAs

Run: /ip ipsec installed-sa print detail

1 step

  1. Send 
    /ip ipsec installed-sa print detail

    Sends Enter afterwards.

Flush IPsec SAs

Run: /ip ipsec installed-sa flush

1 step · asks for confirmation before it runs

  1. Send 
    /ip ipsec installed-sa flush

    Sends Enter afterwards.

List L2TP Server Sessions

Run: /ppp active print where service=l2tp

1 step

  1. Send 
    /ppp active print where service=l2tp

    Sends Enter afterwards.

List SSTP Server Sessions

Run: /ppp active print where service=sstp

1 step

  1. Send 
    /ppp active print where service=sstp

    Sends Enter afterwards.

List PPP Secrets

Run: /ppp secret print detail

1 step

  1. Send 
    /ppp secret print detail

    Sends Enter afterwards.

Add PPP Secret

Run: /ppp secret add name="{{USERNAME}}" password="{{PASSWORD}}" service={{PPP_SERVICE}} profile="{{PPP_PROFILE}}"

1 step · 4 inputs

  1. Send 
    /ppp secret add name="{{USERNAME}}" password="{{PASSWORD}}" service={{PPP_SERVICE}} profile="{{PPP_PROFILE}}"

    Sends Enter afterwards.

Disable PPP Secret

Run: /ppp secret disable [find where name="{{USERNAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /ppp secret disable [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

Enable PPP Secret

Run: /ppp secret enable [find where name="{{USERNAME}}"]

1 step · 1 input

  1. Send 
    /ppp secret enable [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

Remove PPP Secret

Run: /ppp secret remove [find where name="{{USERNAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /ppp secret remove [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

List GRE Tunnels

Run: /interface gre print detail

1 step

  1. Send 
    /interface gre print detail

    Sends Enter afterwards.

Create GRE Tunnel

Run: /interface gre add name="{{TUNNEL_NAME}}" local-address={{LOCAL_ADDRESS}} remote-address={{REMOTE_ADDRESS}}

1 step · 3 inputs

  1. Send 
    /interface gre add name="{{TUNNEL_NAME}}" local-address={{LOCAL_ADDRESS}} remote-address={{REMOTE_ADDRESS}}

    Sends Enter afterwards.

List EoIP Tunnels

Run: /interface eoip print detail

1 step

  1. Send 
    /interface eoip print detail

    Sends Enter afterwards.

Create EoIP Tunnel

Run: /interface eoip add name="{{TUNNEL_NAME}}" remote-address={{REMOTE_ADDRESS}} tunnel-id={{TUNNEL_ID}}

1 step · 3 inputs

  1. Send 
    /interface eoip add name="{{TUNNEL_NAME}}" remote-address={{REMOTE_ADDRESS}} tunnel-id={{TUNNEL_ID}}

    Sends Enter afterwards.

MikroTik - Queues & Traffic Control

14 buttons

List Simple Queues

Run: /queue simple print detail

1 step

  1. Send 
    /queue simple print detail

    Sends Enter afterwards.

Show Simple Queue Statistics

Run: /queue simple print stats

1 step

  1. Send 
    /queue simple print stats

    Sends Enter afterwards.

Add Simple Queue

Run: /queue simple add name="{{QUEUE_NAME}}" target={{TARGET_CIDR}} max-limit={{UPLOAD_LIMIT}}/{{DOWNLOAD_LIMIT}}

1 step · 4 inputs

  1. Send 
    /queue simple add name="{{QUEUE_NAME}}" target={{TARGET_CIDR}} max-limit={{UPLOAD_LIMIT}}/{{DOWNLOAD_LIMIT}}

    Sends Enter afterwards.

Disable Simple Queue

Run: /queue simple disable [find where name="{{QUEUE_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /queue simple disable [find where name="{{QUEUE_NAME}}"]

    Sends Enter afterwards.

Enable Simple Queue

Run: /queue simple enable [find where name="{{QUEUE_NAME}}"]

1 step · 1 input

  1. Send 
    /queue simple enable [find where name="{{QUEUE_NAME}}"]

    Sends Enter afterwards.

Remove Simple Queue

Run: /queue simple remove [find where name="{{QUEUE_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /queue simple remove [find where name="{{QUEUE_NAME}}"]

    Sends Enter afterwards.

List Queue Trees

Run: /queue tree print detail

1 step

  1. Send 
    /queue tree print detail

    Sends Enter afterwards.

List Queue Types

Run: /queue type print detail

1 step

  1. Send 
    /queue type print detail

    Sends Enter afterwards.

Add PCQ Upload Type

Run: /queue type add name="{{QUEUE_TYPE}}" kind=pcq pcq-classifier=src-address pcq-rate={{RATE}}

1 step · 2 inputs

  1. Send 
    /queue type add name="{{QUEUE_TYPE}}" kind=pcq pcq-classifier=src-address pcq-rate={{RATE}}

    Sends Enter afterwards.

Add PCQ Download Type

Run: /queue type add name="{{QUEUE_TYPE}}" kind=pcq pcq-classifier=dst-address pcq-rate={{RATE}}

1 step · 2 inputs

  1. Send 
    /queue type add name="{{QUEUE_TYPE}}" kind=pcq pcq-classifier=dst-address pcq-rate={{RATE}}

    Sends Enter afterwards.

List Traffic Flow Settings

Run: /ip traffic-flow print

1 step

  1. Send 
    /ip traffic-flow print

    Sends Enter afterwards.

Enable Traffic Flow

Run: /ip traffic-flow set enabled=yes interfaces="{{INTERFACES}}"

1 step · 1 input

  1. Send 
    /ip traffic-flow set enabled=yes interfaces="{{INTERFACES}}"

    Sends Enter afterwards.

Add Traffic Flow Target

Run: /ip traffic-flow target add dst-address={{COLLECTOR_IP}} port={{PORT}} version={{NETFLOW_VERSION}}

1 step · 3 inputs

  1. Send 
    /ip traffic-flow target add dst-address={{COLLECTOR_IP}} port={{PORT}} version={{NETFLOW_VERSION}}

    Sends Enter afterwards.

Disable Traffic Flow

Run: /ip traffic-flow set enabled=no

1 step · asks for confirmation before it runs

  1. Send 
    /ip traffic-flow set enabled=no

    Sends Enter afterwards.

MikroTik - Monitoring & Troubleshooting

24 buttons

Show System Log

Run: /log print

1 step

  1. Send 
    /log print

    Sends Enter afterwards.

Follow System Log

Run: /log print follow

1 step

  1. Send 
    /log print follow

    Sends Enter afterwards.

Show Error Logs

Run: /log print where topics~"error"

1 step

  1. Send 
    /log print where topics~"error"

    Sends Enter afterwards.

List Logging Actions

Run: /system logging action print detail

1 step

  1. Send 
    /system logging action print detail

    Sends Enter afterwards.

Add Remote Syslog Action

Run: /system logging action add name="{{ACTION_NAME}}" target=remote remote={{SYSLOG_SERVER}} remote-port={{PORT}}

1 step · 3 inputs

  1. Send 
    /system logging action add name="{{ACTION_NAME}}" target=remote remote={{SYSLOG_SERVER}} remote-port={{PORT}}

    Sends Enter afterwards.

Add Remote Logging Rule

Run: /system logging add topics="{{LOG_TOPICS}}" action="{{ACTION_NAME}}"

1 step · 2 inputs

  1. Send 
    /system logging add topics="{{LOG_TOPICS}}" action="{{ACTION_NAME}}"

    Sends Enter afterwards.

Show Torch

Run: /tool torch interface="{{INTERFACE}}" duration={{DURATION}}

1 step · 2 inputs

  1. Send 
    /tool torch interface="{{INTERFACE}}" duration={{DURATION}}

    Sends Enter afterwards.

Torch by IP

Run: /tool torch interface="{{INTERFACE}}" src-address={{SOURCE_CIDR}} duration={{DURATION}}

1 step · 3 inputs

  1. Send 
    /tool torch interface="{{INTERFACE}}" src-address={{SOURCE_CIDR}} duration={{DURATION}}

    Sends Enter afterwards.

Packet Sniffer Quick View

Run: /tool sniffer quick interface="{{INTERFACE}}" ip-protocol={{PROTOCOL}} port={{PORT}}

1 step · 3 inputs

  1. Send 
    /tool sniffer quick interface="{{INTERFACE}}" ip-protocol={{PROTOCOL}} port={{PORT}}

    Sends Enter afterwards.

Start Packet Capture

Run: /tool sniffer set filter-interface="{{INTERFACE}}" filter-port={{PORT}} file-name="{{CAPTURE_FILE}}"; /tool sniffer start

1 step · 3 inputs

  1. Send 
    /tool sniffer set filter-interface="{{INTERFACE}}" filter-port={{PORT}} file-name="{{CAPTURE_FILE}}"; /tool sniffer start

    Sends Enter afterwards.

Stop Packet Capture

Run: /tool sniffer stop

1 step

  1. Send 
    /tool sniffer stop

    Sends Enter afterwards.

Show Packet Sniffer Status

Run: /tool sniffer print

1 step

  1. Send 
    /tool sniffer print

    Sends Enter afterwards.

Bandwidth Test

Run: /tool bandwidth-test address={{HOST}} user="{{USERNAME}}" password="{{PASSWORD}}" protocol={{PROTOCOL}} direction={{DIRECTION}} duration={{DURATION}}

1 step · 6 inputs

  1. Send 
    /tool bandwidth-test address={{HOST}} user="{{USERNAME}}" password="{{PASSWORD}}" protocol={{PROTOCOL}} direction={{DIRECTION}} duration={{DURATION}}

    Sends Enter afterwards.

Flood Ping

Run: /tool flood-ping {{HOST}} count={{COUNT}}

1 step · 2 inputs

  1. Send 
    /tool flood-ping {{HOST}} count={{COUNT}}

    Sends Enter afterwards.

DNS Resolve

Run: /put [:resolve "{{HOST}}"]

1 step · 1 input

  1. Send 
    /put [:resolve "{{HOST}}"]

    Sends Enter afterwards.

Fetch URL

Run: /tool fetch url="{{URL}}" output={{FETCH_OUTPUT}}

1 step · 2 inputs

  1. Send 
    /tool fetch url="{{URL}}" output={{FETCH_OUTPUT}}

    Sends Enter afterwards.

Show Profiler

Run: /tool profile duration={{DURATION}}

1 step · 1 input

  1. Send 
    /tool profile duration={{DURATION}}

    Sends Enter afterwards.

Show Connection Tracking Count

Run: /put [/ip firewall connection print count-only]

1 step

  1. Send 
    /put [/ip firewall connection print count-only]

    Sends Enter afterwards.

Show CPU Load

Run: /put [/system resource get cpu-load]

1 step

  1. Send 
    /put [/system resource get cpu-load]

    Sends Enter afterwards.

Show Free Memory

Run: /put [/system resource get free-memory]

1 step

  1. Send 
    /put [/system resource get free-memory]

    Sends Enter afterwards.

Show Uptime

Run: /put [/system resource get uptime]

1 step

  1. Send 
    /put [/system resource get uptime]

    Sends Enter afterwards.

Show Files

Run: /file print detail

1 step

  1. Send 
    /file print detail

    Sends Enter afterwards.

Show Supout Status

Run: /system sup-output print

1 step

  1. Send 
    /system sup-output print

    Sends Enter afterwards.

Generate Support File

Run: /system sup-output name="{{SUPPORT_FILE}}"

1 step · 1 input

  1. Send 
    /system sup-output name="{{SUPPORT_FILE}}"

    Sends Enter afterwards.

MikroTik - Users, Scripts & Scheduler

22 buttons

List Users

Run: /user print detail

1 step

  1. Send 
    /user print detail

    Sends Enter afterwards.

Add Full User

Run: /user add name="{{USERNAME}}" password="{{PASSWORD}}" group=full

1 step · 2 inputs

  1. Send 
    /user add name="{{USERNAME}}" password="{{PASSWORD}}" group=full

    Sends Enter afterwards.

Add Read-Only User

Run: /user add name="{{USERNAME}}" password="{{PASSWORD}}" group=read

1 step · 2 inputs

  1. Send 
    /user add name="{{USERNAME}}" password="{{PASSWORD}}" group=read

    Sends Enter afterwards.

Set User Password

Run: /user set [find where name="{{USERNAME}}"] password="{{PASSWORD}}"

1 step · 2 inputs

  1. Send 
    /user set [find where name="{{USERNAME}}"] password="{{PASSWORD}}"

    Sends Enter afterwards.

Disable User

Run: /user disable [find where name="{{USERNAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /user disable [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

Enable User

Run: /user enable [find where name="{{USERNAME}}"]

1 step · 1 input

  1. Send 
    /user enable [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

Remove User

Run: /user remove [find where name="{{USERNAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /user remove [find where name="{{USERNAME}}"]

    Sends Enter afterwards.

List Active Users

Run: /user active print detail

1 step

  1. Send 
    /user active print detail

    Sends Enter afterwards.

List User Groups

Run: /user group print detail

1 step

  1. Send 
    /user group print detail

    Sends Enter afterwards.

List Scripts

Run: /system script print detail

1 step

  1. Send 
    /system script print detail

    Sends Enter afterwards.

Run Script

Run: /system script run [find where name="{{SCRIPT_NAME}}"]

1 step · 1 input

  1. Send 
    /system script run [find where name="{{SCRIPT_NAME}}"]

    Sends Enter afterwards.

Add Script

Run: /system script add name="{{SCRIPT_NAME}}" source="{{SCRIPT_SOURCE}}" policy={{POLICIES}}

1 step · 3 inputs

  1. Send 
    /system script add name="{{SCRIPT_NAME}}" source="{{SCRIPT_SOURCE}}" policy={{POLICIES}}

    Sends Enter afterwards.

Remove Script

Run: /system script remove [find where name="{{SCRIPT_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /system script remove [find where name="{{SCRIPT_NAME}}"]

    Sends Enter afterwards.

List Scheduler Jobs

Run: /system scheduler print detail

1 step

  1. Send 
    /system scheduler print detail

    Sends Enter afterwards.

Add Scheduler Job

Run: /system scheduler add name="{{JOB_NAME}}" interval={{INTERVAL}} start-time={{START_TIME}} on-event="{{SCRIPT_NAME}}"

1 step · 4 inputs

  1. Send 
    /system scheduler add name="{{JOB_NAME}}" interval={{INTERVAL}} start-time={{START_TIME}} on-event="{{SCRIPT_NAME}}"

    Sends Enter afterwards.

Disable Scheduler Job

Run: /system scheduler disable [find where name="{{JOB_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /system scheduler disable [find where name="{{JOB_NAME}}"]

    Sends Enter afterwards.

Enable Scheduler Job

Run: /system scheduler enable [find where name="{{JOB_NAME}}"]

1 step · 1 input

  1. Send 
    /system scheduler enable [find where name="{{JOB_NAME}}"]

    Sends Enter afterwards.

Remove Scheduler Job

Run: /system scheduler remove [find where name="{{JOB_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /system scheduler remove [find where name="{{JOB_NAME}}"]

    Sends Enter afterwards.

List Certificates

Run: /certificate print detail

1 step

  1. Send 
    /certificate print detail

    Sends Enter afterwards.

Create Certificate Template

Run: /certificate add name="{{CERT_NAME}}" common-name="{{COMMON_NAME}}" key-size={{KEY_SIZE}} days-valid={{DAYS_VALID}} key-usage={{KEY_USAGE}}

1 step · 5 inputs

  1. Send 
    /certificate add name="{{CERT_NAME}}" common-name="{{COMMON_NAME}}" key-size={{KEY_SIZE}} days-valid={{DAYS_VALID}} key-usage={{KEY_USAGE}}

    Sends Enter afterwards.

Sign Certificate

Run: /certificate sign [find where name="{{CERT_NAME}}"]

1 step · 1 input

  1. Send 
    /certificate sign [find where name="{{CERT_NAME}}"]

    Sends Enter afterwards.

Export Certificate

Run: /certificate export-certificate [find where name="{{CERT_NAME}}"] export-passphrase="{{PASSWORD}}"

1 step · 2 inputs

  1. Send 
    /certificate export-certificate [find where name="{{CERT_NAME}}"] export-passphrase="{{PASSWORD}}"

    Sends Enter afterwards.

MikroTik - Backup, Export & Updates

20 buttons

Create Binary Backup

Run: /system backup save name="{{BACKUP_NAME}}" password="{{PASSWORD}}" encryption=aes-sha256

1 step · 2 inputs

  1. Send 
    /system backup save name="{{BACKUP_NAME}}" password="{{PASSWORD}}" encryption=aes-sha256

    Sends Enter afterwards.

Create Unencrypted Backup

Run: /system backup save name="{{BACKUP_NAME}}" dont-encrypt=yes

1 step · 1 input

  1. Send 
    /system backup save name="{{BACKUP_NAME}}" dont-encrypt=yes

    Sends Enter afterwards.

Load Binary Backup

Run: /system backup load name="{{BACKUP_FILE}}" password="{{PASSWORD}}"

1 step · asks for confirmation before it runs · 2 inputs

  1. Send 
    /system backup load name="{{BACKUP_FILE}}" password="{{PASSWORD}}"

    Sends Enter afterwards.

Export Configuration

Run: /export file="{{EXPORT_NAME}}" show-sensitive=no

1 step · 1 input

  1. Send 
    /export file="{{EXPORT_NAME}}" show-sensitive=no

    Sends Enter afterwards.

Export Sensitive Configuration

Run: /export file="{{EXPORT_NAME}}" show-sensitive=yes

1 step · 1 input

  1. Send 
    /export file="{{EXPORT_NAME}}" show-sensitive=yes

    Sends Enter afterwards.

Export Compact Configuration

Run: /export compact file="{{EXPORT_NAME}}" show-sensitive=no

1 step · 1 input

  1. Send 
    /export compact file="{{EXPORT_NAME}}" show-sensitive=no

    Sends Enter afterwards.

Export Specific Menu

Run: {{MENU_PATH}} export file="{{EXPORT_NAME}}" show-sensitive=no

1 step · 2 inputs

  1. Send 
    {{MENU_PATH}} export file="{{EXPORT_NAME}}" show-sensitive=no

    Sends Enter afterwards.

Import Configuration

Run: /import file-name="{{IMPORT_FILE}}" verbose=yes

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /import file-name="{{IMPORT_FILE}}" verbose=yes

    Sends Enter afterwards.

List Backup Files

Run: /file print where name~"backup|rsc"

1 step

  1. Send 
    /file print where name~"backup|rsc"

    Sends Enter afterwards.

Remove File

Run: /file remove [find where name="{{FILE_NAME}}"]

1 step · asks for confirmation before it runs · 1 input

  1. Send 
    /file remove [find where name="{{FILE_NAME}}"]

    Sends Enter afterwards.

Check for RouterOS Updates

Run: /system package update check-for-updates

1 step

  1. Send 
    /system package update check-for-updates

    Sends Enter afterwards.

Show Update Settings

Run: /system package update print

1 step

  1. Send 
    /system package update print

    Sends Enter afterwards.

Set Update Channel

Run: /system package update set channel={{UPDATE_CHANNEL}}

1 step · 1 input

  1. Send 
    /system package update set channel={{UPDATE_CHANNEL}}

    Sends Enter afterwards.

Download RouterOS Update

Run: /system package update download

1 step

  1. Send 
    /system package update download

    Sends Enter afterwards.

Install RouterOS Update

Run: /system package update install

1 step · asks for confirmation before it runs

  1. Send 
    /system package update install

    Sends Enter afterwards.

Upgrade RouterBOARD Firmware

Run: /system routerboard upgrade

1 step · asks for confirmation before it runs

  1. Send 
    /system routerboard upgrade

    Sends Enter afterwards.

Check Cloud Backup

Run: /system backup cloud print

1 step

  1. Send 
    /system backup cloud print

    Sends Enter afterwards.

Create Cloud Backup

Run: /system backup cloud upload-file action=create-and-upload password="{{PASSWORD}}"

1 step · 1 input

  1. Send 
    /system backup cloud upload-file action=create-and-upload password="{{PASSWORD}}"

    Sends Enter afterwards.

Download File from Router

Run: /tool fetch url="{{URL}}" dst-path="{{DESTINATION_FILE}}"

1 step · 2 inputs

  1. Send 
    /tool fetch url="{{URL}}" dst-path="{{DESTINATION_FILE}}"

    Sends Enter afterwards.

Send Backup by Email

Run: /tool e-mail send to="{{EMAIL}}" subject="{{SUBJECT}}" file="{{FILE_NAME}}"

1 step · 3 inputs

  1. Send 
    /tool e-mail send to="{{EMAIL}}" subject="{{SUBJECT}}" file="{{FILE_NAME}}"

    Sends Enter afterwards.

Version history

  • Revision 1 current

    First published version.

    13 Aug 2026 · 107.1 KB · needs 1.0.0+ · 88dba494bf313d6f…

    View Download

Something wrong with this set?

Sign in to report it, or email abuse@smartcomrevisited.com.