MikroTik RouterOS — Network

MikroTik

RouterOS interfaces, bridges, VLANs, addressing, routing and firewall.

The network half of RouterOS: interfaces, bridges and VLANs, IP addressing and ARP, static and dynamic routing with BGP and OSPF, firewall and NAT rules, and DHCP and DNS services.

routeros
mikrotik
firewall
routing
bridge

Buttons: 135
Prompt for input: 82
Behind a confirmation: 25
Gate names the target: 1

Installed with SmartCom Revisited 1.6.1 — there is nothing to download. Open the button panel and it is there.

6 sets

Each one imports on its own, so a bundle this size never arrives as a single wall of buttons. Hide the sets you do not need, or name the ones a connection uses and the panel shows only those.

They arrive pre-tagged, so you do not have to name them at all: tag a connection bridge and the matching sets appear on it.

MikroTik - System & Identity

17 buttons 5 prompt 3 guarded

Identity, resources, clock, licence and health.

Basic facts about the router: identity and RouterOS version, CPU, memory and disk, board health and voltage, licence level and the current time and time zone.

Appears on hosts tagged bridge firewall mikrotik routeros routing

MikroTik - Interfaces, Bridges & VLANs

29 buttons 21 prompt 5 guarded

Interfaces, bridge ports, VLANs and wireless links.

Layer 2 configuration: interface state and counters, bridge and bridge port membership, VLAN interfaces and filtering, bonding and the wireless registration table.

Appears on hosts tagged bridge firewall mikrotik routeros routing

MikroTik - IP Addresses, ARP & Neighbors

18 buttons 14 prompt 4 guarded

Addressing, ARP entries, neighbour discovery and pools.

IP layer basics: addresses per interface, the ARP table and static entries, MikroTik neighbour discovery, address pools and the cloud DDNS status.

Appears on hosts tagged bridge firewall mikrotik routeros routing

MikroTik - Routing, BGP & OSPF

22 buttons 12 prompt 3 guarded

Routing table, static routes, BGP peers and OSPF neighbours.

Routing on RouterOS: the route table with its flags, static route management, BGP peer and advertisement state, OSPF neighbours and interfaces, and route filters.

Appears on hosts tagged bridge firewall mikrotik routeros routing

MikroTik - Firewall, NAT & Address Lists

25 buttons 14 prompt 7 guarded

Filter and NAT rules, address lists and connection tracking.

The firewall: filter and NAT rule listings with counters, adding accept and drop rules, address list management, mangle marks and the connection tracking table.

Appears on hosts tagged bridge firewall mikrotik routeros routing

MikroTik - DHCP, DNS & Services

24 buttons 16 prompt 3 guarded

DHCP server and client, leases, DNS cache and services.

Services on the router: DHCP servers, networks and active leases, static lease binding, DNS settings and cache, plus which management services are exposed and on what port.

Appears on hosts tagged bridge firewall mikrotik routeros routing

Read it before you run it

These commands were written from MikroTik's documented syntax and checked for structure — not run against live MikroTik RouterOS — Network hardware. Every button shows its full script in the app before you press it. For anything destructive, read that script and try it in a lab first.